Panasonic KX-T 1232 Programming Codes |
Move switch on left side of cabinet to PROGRAM. Use main phone to program. (Return to middle position when done)
| ||
Code
|
Description (Default)
| |
00
| Time/Date | |
01
| System Speed Dial (00 to 99) | |
02
| Extension Number Assignment (01=101 etc.) | |
03
| Operator Assignment (Operator 1 and Operator 2) | |
04
| Paired Telephone DSS Console Assignment | |
05
| Automatic CO Transfer using DSS key (With/Without Transfer) | |
06
| Day/Night Service (Manual/Automatic) | |
07
| System Starting Time for Day/Night service (9:00 AM to 5:00 PM) | |
08
| Call Hunting Setting (Group 1 through Group 8) | |
09
| Hunting Type (Terminate/Circular) | |
12
| Toll Restriction-System Speed Dialing (Class 1, 2, 3, 4, 5) | |
13
| Toll Restriction-Class 2 Denied Code Assignment | |
14
| Toll Restriction-Class 3 Denied Code Assignment | |
15
| Toll Restriction-Class 4 Denied Code Assignment | |
16
| Toll Restriction-Class 5 Denied Code Assignment | |
17
| Toll Restriction-Denied Code Assignment | |
18
| Hold Recall Time set (.5 Min./1 Min./1.5 min./2 Min./Disable) | |
19
| Transfer Recall Time (30 Seconds/2 Minutes( | |
20
| Call Forwarding Start time (1,2,3,4 rings delay) | |
21
| Pickup Dial Delay Time (1, 2, 3, 4 Seconds) | |
22
| CO to CO Duration Time Limit 1 to 32 Minutes | |
23
| SMDR RS232 Parameters | CR+LF, CRBaud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600 Word Length 7 Bits, 8 Bits Parity None, Mark, Space, Even, Odd Stop Bit Length 1 Bit, 2 Bits |
24
| SMDR Parameters (Lines per page 66) (Skipping lines 0) | |
25
| Incoming/Outgoing Selection for printing | |
26
| Secret Speed Dialing/One Touch Dial printing (Printing/No Printing) | |
27
| SMDR System Data Dump | |
28
| Duration Time Count Start Mode (5, 10, 15 Seconds after dial) | |
29
| External Paging Access Tone (Enable/Disable) | |
31
| DISA (Enable/Disable) | |
32
| OPX (Enable/Disable) | |
33
| OHCA (Enable/Disable) | |
34
| System Working Report | |
40
| CO Connection (Connect/Not Connect Lines 1 through 12) | |
41
| DTMF/Pulse/Call Blocking | |
42
| Pulse Speed Selection | |
43
| Host PBX Access Codes Assignment | |
44
| Trunk Group Assignment 1-8 | |
45
| Outward Dialing, Day (All stations enabled) | |
46
| Outward Dialing, Night (All stations enabled) | |
47
| Ringing, Day (All stations enabled) | |
48
| Ringing, Night (All stations enabled) | |
49
| Ring Delay, Day (1, 2, 3, 4, Immediate Rings) | |
50
| Ring Delay, Night (1, 2, 3, 4, Immediate Rings) | |
51
| CO Mode, Day (Normal, DIL, DISA) | |
52
| CO Mode, Night (Normal, DIL, DISA) | |
53
| Pause Time Assignment (1.5, 2.5, 3.5, 4.5 Seconds) | |
54
| Hook Flash time (300ms 600ms 900ms 1200ms)(600ms default) | |
55
| CPC | |
56
| Disconnect Time (1.5, 4.0 Seconds) | |
57
| Auto Designated line access (Enable/Disable) | |
60
| Extension Groups 1 through 8 (Group1) | |
61
| Service Class Assignment of Toll Restriction, Day | |
62
| Service Class Assignment of Toll Restriction, Night | |
63
| Extension Name | |
64
| Account Code Input Mode | |
65
| Call Transfer to Outside line (Enable/Disable) | |
66
| Call Forwarding to Outside Line (Enable/Disable) | |
67
| Executive override (Enable/Disable) | |
68
| DND Override (Enable/Disable) | |
69
| SLT Connection with proprietary telephone (Enable/Disable) | |
70
| Ringing from Door Phone, Day (Enable/Disable) | |
71
| Ringing from Door Phone, Night (Enable/Disable) | |
72
| Assignment of Door Opener, Day (Enable/Disable) | |
73
| Assignment of Door Opener, Night (Enable/Disable) | |
80
| Voice Mail Port assignment (Enable/Disable) (Circle3, Circle B only) | |
81
| DTMF Integration Assignment (Enable/Disable) (Circle3, Circle B only) | |
91
| Call on Hold for SLT (Hold 1=Flash or Hold 2=Flash 20) | |
99
| System Data Clear |
Voice Mail Integration (Forwarding) (B is recommended for TVS) (Circle3, Circle B only) | ||
Setting A | 7191# | Forwards a mailbox number to the VPS port |
Setting B | 7192# | #6 plus a mailbox number is sent to the VPS |
Cancel | 7190# | Cancels all forwarding |
No comments:
Post a Comment